China wholesale Wire Terminal Crimping Tool Factories – HL-400 Battery Powered Crimping Tool – HEWLEE Tools Detail:
Features
1. 360° rotating clamp head,which is suitable for various operations
2. OLED real-time display of various information
3. One key control,the operation is simple and convenient, one complete the operation
4. One key reset, when there is an error in the crimping process, you can easily reset by pressing the trigger
5. Battery upgrade to 4.0AH.Two batteries can work in turn
Specification
Max. crimping force: | 120KN |
Crimping range: | 10-300 mm2 |
Stroke: | 17mm |
Hydraulic oil: | Shell Tellus T15# |
Ambient temperature: | -10 – 40℃ |
Battery: | 18v 4.0Ah Li-Ion |
Crimping cycle: | 42mm(depending on the size) |
Crimp/charger: | Approx. 260 crimps (Cu150 mm2) |
Charging voltage: | AC 100V〜240V; 50〜60Hz |
Charging time: | Approx. 1.5 hours |
OLED display: | display voltage, temperature, crimping times, errors information |
Accessories: | |
Crimping die (mm2): | 10.16.25.35.50.70.95.120.150.185.240.300 |
Weight(incl. battery): | Approx. 6.86kg |
Gross weight: |
Approx.16kg |
Carton size: |
540x430x170mm |
Package: |
One pc/Aluminum alloy case/Cardboard box |
Battery: | 2 pcs |
Charger: | 1 pcs |
Sealing ring of cylinder: | 1 set |
Sealing ring of safety valve: | 1 set |
Description of Components
Parts No. |
Description |
Function |
1 |
Pin | For locking/unlocking the upper die |
2 |
Die | For crimping, interchangeable die |
3 |
Retaining clips | For locking/unlocking the down die |
4 |
Limited screw | For prevent head from dropping or popping |
5 |
LED indicator | For indicating the operating condition and battery discharging situation |
6 |
A white Led light | To illuminate the working area |
7 |
Trigger | For starting operation |
8 |
Retract button | For manual retracting the piston in case of an incorrect operation |
8 |
Trigger | For starting operation |
9 |
Battery lock | For locking/unlocking the battery |
10 |
Battery | For supplying power, rechargeable Li-ion(18V) |
Function Description
1. MCU – automatically detect the pressure during operation and provide security protect, shut off the motor and reset automatically after operation.
2. Auto reset – release the pressure automatically, retract the piston to the starting position when reached the max output.
3. Manual reset – can retract the position to the starting positioning in case of an incorrect crimp
4. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.
5. The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
6. One significant sound will be heard and a red display flashes if any error occurs.
A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after releasing the trigger.
7. The whole tool is controlled by one trigger. This results in any easy handing and a better grip compared to a two button operation.
8. Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to Ni-MH batteries.
9. A Temperature sensor makes the tool stop working automatically when the temperature over 60°C under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.
Product detail pictures:
Related Product Guide:
Assume full responsibility to satisfy all needs of our clients; achieve continual advancements by endorsing the expansion of our purchasers; turn into the final permanent cooperative partner of clientele and maximize the interests of clients for China wholesale Wire Terminal Crimping Tool Factories – HL-400 Battery Powered Crimping Tool – HEWLEE Tools, The product will supply to all over the world, such as: Seattle, Hungary, Oman, Item have passed by means of the national qualified certification and been well received in our main industry. Our expert engineering team will often be ready to serve you for consultation and feedback. We are able to also deliver you with cost-free samples to meet your specifications. Ideal efforts will probably be produced to provide you the most beneficial service and solutions. Should you be interested in our company and solutions, please make contact with us by sending us emails or call us straight away. To be able to know our solutions and enterprise. ar more, you'll be able to come to our factory to see it. We'll constantly welcome guests from all over the world to our firm. o build business enterprise. elations with us. Please feel absolutely free to speak to us for organization. nd we believe we will share the best trading practical experience with all our merchants.
By Joanna from Belize - 2017.05.02 11:33
Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.
By Marguerite from Burundi - 2018.09.23 18:44