China wholesale Electrical Wire Crimping Tool Supplier – HL-400 Battery Powered Crimping Tool – HEWLEE Tools

Features

1. 360° rotating clamp head,which is suitable for various operations

2. OLED real-time display of various information

3. One key control,the operation is simple and convenient, one complete the operation

4. One key reset, when there is an error in the crimping process, you can easily reset by pressing the trigger

5. Battery upgrade to 4.0AH.Two batteries can work in turn

Specification

Description of Components

Function Description

1. MCU – automatically detect the pressure during operation and provide security protect, shut off the motor and reset automatically after operation.

2. Auto reset – release the pressure automatically, retract the piston to the starting position when reached the max output.

3. Manual reset – can retract the position to the starting positioning in case of an incorrect crimp

4. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies forwards the connector and a slow crimping motion.

5. The crimping head can be smoothly turned by 360° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.

6. One significant sound will be heard and a red display flashes if any error occurs.

A white LED illuminates the working space after activating the trigger. It automatically switches off 10 sec. after releasing the trigger.

7. The whole tool is controlled by one trigger. This results in any easy handing and a better grip compared to a two button operation.

8. Li-ion batteries do neither have a memory effect nor self discharge. Even after long periods of non operation, the tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to Ni-MH batteries.

9. A Temperature sensor makes the tool stop working automatically when the temperature over 60°C under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.